Cream French Doors and Top Light

All frames are made to measure.

• Sizes stated should be the overall frame size including any cill and frame extensions (if required).
• All dimensions to be supplied in Metric.
• All frame styles are viewed from outside.
• We do not make any fitting allowances on the sizes you provide. The size you state will be the size we manufacture.

All external cills are 30mm high and will need to be included in the overall height.

85mm stub cill
The stub cill protrudes just 15mm from the external frame.

150mm standard cill
The most common and standard cill size covers most applications. Protrudes 80mm from the external frame.

180mm cill
If your frame is set further back into the brickwork then you may require the oversized cill which protrudes 110mm from the frame.

Thresholds.

Please Note: The aluminium threshold type shown is subject to stock, an alternative aluminium threshold will be used if this is unavailable.

Frame Extensions/Add On's

A frame extender allows you to increase the thickness of the frame. Useful for properties with deep plaster, render or tiles. 10mm, 20mm and 50mm extensions are available.

Remember, if you require any extensions, these need to be included in the overall dimensions.

EnergyPlus Profile & Argon Filled Sealed Units – Unbeatable Thermal Efficiency

The uniquely designed six-chambered EnergyPlus profile system not only prevents the transfer of cold air from outside to in, it outperforms the highest energy performance standards currently in existence.

The argon upgrade will improve even further the U-value on the door by at least 0.2W/m2K. Selecting the thermal option on the glass will upgrade the glass to have a warm edge spacer bar, low E glass and double glazed sealed units filled with argon gas.

A++ Triple Glazing - 0.9 U Value

The uniquely designed six-chambered EnergyPlus profile system not only prevents the transfer of cold air from outside to in, it outperforms the highest energy performance standards currently in existence.

The 38mm (4/14/4/12/4) triple glazed argon filled sealed units will significantly improve the U-value and Energy Index on the window achieving A++ 24 energy rating.

Laminated Glass

The laminated glass consists of two pieces of glass, one 6.4mm thick containing a sandwich of plastic interlayer. Offering additional protection as the glass cannot be broken into. It's the same glass found in car windscreens and shop fronts.

Internal Georgian Bars

We offer an array of decorative Georgian Bar designs. The internal bars are fitted within the sealed unit and 18mm thick as standard, available in our extensive range of colours to match the profile colour.

External Astragal Bars

We offer an array of decorative external bar designs. The astragal bars are fitted on the outside of the sealed unit and 20mm thick as standard, available in our extensive range of colours to match the profile colour.

Square Lead

We offer 9mm decorative square lead on the external pane of glass.

Diamond Lead

We offer 9mm decorative diamond lead on the external pane of glass.

Trickle Ventilation

Trickle vents allow you to control ventilation and air circulation, helping to reduce condensation and mould. They provide you with a small amount of fresh air into the building without letting a lot of heat escape.

If the current windows and doors have trickle vents fitted, then the new replacements must also be fitted with trickle vents.

All new build properties and extensions are required to have adequate background ventilation whether this is by trickle vents, purge ventilation or extraction.

Fixing Screws & Packers

The installation pack includes a selection of universal frame and glazing packers, large 120mm self tapping frame screws (no rawl plugs required) and self tapping cill screws. Fixing screws for extension pieces will also be supplied if required.